User Manual

2.
Unlock the lever of the size change plate.
3.
Load the desired paper to approximately 10 mm in height. Slide the outer size change
plate and inner size change plate to align them with the desired paper size.
#
IMPORTANT
Do not subject the paper holder plate to shock when loading paper into the paper
tray, as this may result in a malfunction or damage to the machine.
#
IMPORTANT
Adjust the guides correctly to avoid causing a paper jam, dirty prints, or make the
inside of the machine dirty.
Chapter 9 - Paper, toner, and staples 231
Adjust the paper tray to hold a different media size