User Manual

2.
Place the originals face up into the original supply tray until the original set indicator (1)
is lit.
1
#
IMPORTANT
■
Do not add or remove originals while they are being scanned.
■
When scanning is complete, remove the originals from the original output tray to
avoid paper jams.
#
NOTE
■
When you are enlarging an A4 or B5 original onto A3 or B4 paper, place the
original horizontally.
■
The scanned originals are output to the original output area in the order they are
fed into the feeder.
Chapter 7 - Copy jobs 189
Feed originals to the ADF (optional)