User Manual

FunctionComponent
The bulk paper module contains the
media that will be printed. The bulk
paper module contains 1 media type.
Bulk paper module
(Paper Deck-AC1)
11
The special feeder is used to feed
media manually.
Special feeder
(Stack Bypass-A1)
12
The tab feeder is used to load tab
paper into the paper trays.
Tab feeder
(Tab Feeding Attachment-C1)
-
Optional finishing equipment
Output options#
FunctionComponent
The stacker adds output capacity to
your system. The stacker can not
staple the jobs.
Stacker
(High Capacity Stacker-C1)
Optional, maximum 2.
13
The stacker/stapler offers the follow-
ing functionality.
■
Stack prints
■
Staple prints
■
Create stapled booklets
■
Punch prints
With the optional inserter you can
add preprinted covers to the booklet
and sets.
Stacker/stapler, optional inserter
and optional integrated punch
unit
(Finisher-AJ1 or
Saddle Finisher-AJ2 with
Document Insertion Unit-C1
and
Puncher Unit-BC1/BD1)
14
The trimmer trims the long edge of
a booklet.
Trimmer
(Booklet Trimmer-D1)
15
The two-knife trimmer trims the
short edges of a booklet.
Two-knife trimmer
(Two-Knife Trimmer-A1)
16
The Professional Puncher-B1
punches several types of holes. The
Professional Puncher Integration
Unit-A1 reverses the paper punched
by the Professional Puncher-B1.
Puncher
(Professional Puncher-B1 and
Professional Puncher Integration
Unit-A1)
17
#
NOTE
Please refer to the operating information that comes with the optional finish equip-
ment.
Chapter 2 - Main parts18
Overview of the machine configuration