User Manual

Settings for the output
#
DescriptionValuesSetting
The automatically set value from the original docu-
ment.
'Auto'
'1- or 2-sid-
ed'
The output contains an image on 1 side.
'1-sided'
The output contains an image on both sides.
'2-sided'
The automatically set value from the original docu-
ment.
'Auto'
'Binding
edge'
The output has a vertical format (height > width).
The binding edge is at the left-hand side.
When you turn a sheet over the binding edge the im-
age is in readable form.
'Portrait left'
The output has a vertical format (height > width).
The binding edge of the original is at the top.
When you turn a sheet over the binding edge the im-
age on the back side of the sheet is in readable form.
This means that every back side of a 2-sided original
is upside down compared to the front side.
'Portrait top'
The output has a horizontal format (width > height).
The binding edge of the original is at the left-hand
side.
When you turn a sheet over the binding edge, the text
or image is in readable form.
'Landscape
left'
The output has a horizontal format (width > height).
The binding edge of the original is at the top.
When you turn a sheet over the binding edge, the
image on the back side of the sheet is in readable form.
This means that every back side of a 2-sided original
is upside down compared to the front side.
'Landscape
top'
Chapter 7 - Copy jobs174
Description of the copy job settings