User Manual

DescriptionValuesSetting
Here you can define the required number of staples.
Furthermore you can define where you want the sta-
ples with the 'Location' option.
The available locations for the 1 staple option:
■
'Top left'
■
'Top right'
■
'Bottom left'
■
'Bottom right'
The available locations for the 2 staples option:
■
'Left edge'
■
'Top edge'
■
'Bottom edge'
■
'Right edge'
Check the preview for the result of the selection.
'None'
'1 staple'
'2 staples'
'Saddle
stitching'
'Saddle press-
ing'
'Binding'
'None''Trimming'
Trims the long edge, top edge and bottom edge ac-
cording to the specified values. The minimum trim
size is 2 mm.
'Trim size'
Trims the prints to a selected default size, for example
A4, A5 etc. You can also define a custom size.
'Finishing
size'
Settings for the whole job
#
DescriptionValuesSetting
Displays the job name of the print job. You can not
change the job name of a print job.
'Job name'
Use this setting to define the number of copies. You
can enter a value from 1 - 65,000. The default value
is 1.
'Number of
sets'
Chapter 6 - Print jobs 113
Description of the print job settings