User Manual

#
IMPORTANT
•
Punching is available only if the Puncher Unit-BB1/BC1/BD1 or Professional
Puncher-B1 is attached.
•
Only the following paper size can be hole punched:
A3, B4, A4, A4R, B5, or B5R / 11" x 17", LGL, LTR, LTRR, or EXEC
•
When the Puncher Unit-BC1 is attached, only A3 or A4 paper can be punched
in four holes.
•
If only the optional Puncher Unit-BB1 is attached, the machine automatically
selects how many holes to punch depending on the selected paper size.
- Two holes in case of LGL and LTRR
- Three holes in case of 11" x 17", LTR and EXEC
•
Holes cannot be punched in paper heavier than 201 g/m² / 54 lb Bond, vellums,
transparencies, labels, or prepunched paper.
•
Paper that is fed from the optional Document Insertion Unit-C1 cannot be hole
punched.
#
NOTE
The distance between the punch holes is shown in the illustration below
80 mm
Puncher Unit-BC1 (2 holes)
[25]
80 mm 80 mm 80 mm
Puncher Unit-BC1 (4 holes)
[26]
Chapter 2 - Main parts 51
The stacker/stapler, optional inserter and optional integrated punch unit