User Manual

#
IMPORTANT
•
Saddle stitching (booklets) is available only if the Saddle Finisher-AJ2 is attached.
•
The maximum number of sheets that can be saddle stitched differs depending on
the paper weight and type.
- When using plain paper (80 g/m² / 22 lb Bond), 25 sheets of paper (100 pages)
can be saddle stitched at once.
- When using coated paper (80 g/m² / 22 lb Bond), 15 sheets of paper (60 pages)
can be saddle stitched at once.
•
The paper sizes that can be saddle stitched are: 330.2 mm x 482.6 mm, 320 mm
x 450 mm (SRA3), 304.8 mm x 457.2 mm, A3, B4, A4R, and irregular size (210
mm x 279.4 mm to 330.2 mm x 487.7 mm).
The paper sizes that can be saddle stitched are: 13" x 19", 12.60" x 17.72", 12" x
18", 11" x 17", LGL, LTRR, and irregular size (8 1/4" x 11" to 13" x 19 13/64").
•
The accuracy of folds created with saddle stitching may vary, depending on the
paper type and the number of sheets.
•
Saddle pressing
Saddle press enables you to compress a saddle stitched booklet spine.
Cross Section Cross Section
[24]
#
IMPORTANT
Saddle press is automatically used when you select booklet.
#
NOTE
To make sure that saddle pressing is effective, you must saddle stitch more than nine
sheets of paper (including one cover sheet).
•
Punching
Chapter 2 - Main parts50
The stacker/stapler, optional inserter and optional integrated punch unit