User Manual

Disable the warning time
Introduction
When operator interaction is required now or soon, the dashboard and the operator at-
tention light warn you. However, you can disable this warning function.
Disable the warning time
1.
Touch 'System' -> 'Setup' -> 'Warning time' (under 'Operator panel').
When the box for 'Warning in advance' has a check mark and states 'On', the function
is enabled.
2.
Touch the 'Warning in advance' button.
The check mark disappears. The status 'On' changes into 'Off'.
3.
Press 'OK'.
•The dashboard, on page 84
•The operator attention light, on page 42
Chapter 10 - Adapt printer settings to your needs 323
Disable the warning time