User Manual

#
NOTE
•
Only load paper for use as a cover.
•
You cannot make copies or prints on paper that is loaded in the inserter.
•
Supported media sizes for the upper tray:
- A4, A4R, B5, B5R, or irregular size 182 mm x 182 mm to 297 mm x 330.2 mm
- LTR, LTRR, EXEC or irregular size 7 1/8" x 7 1/8" to 11 11/16 " x 13"
•
Supported media sizes for the lower tray:
- 330.2 mm x 482.6 mm, 320 mm x 450 mm (SRA3), 304.8 mm x 457.2 mm,
A3, B4, A4, A4R, B5, B5R or irregular size 182 mm x 182 mm to 330.2 mm x
487.7 mm
- 13" x 19", 12.60" x 17.72", 12" x 18", 11" x 17", LGL, LTR, LTRR, EXEC or
irregular size 7 1/8" x 7 1/8" to 13" x 19 13/64"
•
A maximum of 200 sheets of paper (80 g/m2 / 22 lb. Bond) can be loaded in the
upper tray of the inserter.
•
A maximum of 200 sheets of paper (80 g/m2 / 22 lb. Bond) can be loaded in the
lower tray of the inserter.
[461] Face up in the lower tray, face down for saddle stitching
Chapter 9 - Paper, toner, and staples 287
Load the required media into the selected tray.