User Manual

8.
Loosen the two black adjustment screws on the outer size change plate using a coin or
something similar.
9.
Insert the spacer (horizontally) into the space between the paper and the outer size change
plate.
10.
Fasten the black adjustment screw on the left using a coin or something similar while
slightly pressing the outer size change plate against the paper stack.
11.
Similarly, fasten the black adjustment screw on the right using a coin or something similar
while slightly pressing the outer size change plate against the paper stack.
Chapter 9 - Paper, toner, and staples264
Adjust the outer size change plate of the bulk paper module (optional)