User Manual

Fasten the left blue screw before fastening the right blue screw.
9.
#
IMPORTANT
If you fasten the blue screw without pressing the outer size change plate towards you,
the plate may be fixed at an angle. If you use the paper tray with a tilted outer size
change plate, paper may be fed as slanted, poor print quality may result, and paper
jams may occur. Therefore, make sure to fasten the blue screw while pressing the
outer size change plate towards you.
10.
Align the rear edge retainer with the marks for the desired paper size.
A4
LT
R
B5
#
IMPORTANT
If the rear edge retainer is not aligned properly, paper may become jammed, the
quality of the image may be degraded, or the inside of the main unit may become
dirty. Be sure to load paper with the rear edge retainer properly aligned with the paper
size marks on the top and base of the paper tray.
Chapter 9 - Paper, toner, and staples 255
Adjust the media size for the bulk media module (optional)