User Manual

6.
Lift up the outer size change plate.
7.
Align the outer size change plate with the marks for the desired paper size that you want
to load.
A4 R
LGL/LTR
R
B5/B4
A4/A3
12 /
5
8
17 /
11
1
6
320mm
(SRA3)
450mm
330mm
13 19
483mm
11 17/LTR
305mm
12 18
457mm
#
IMPORTANT
•
Make sure to align the size change plate properly with the marks for the desired
paper size. There are two marks for paper size at the top of the paper tray. Align
the size change plate with the desired marks.
•
Make sure that the size change plate is properly aligned with the marks for the
desired paper size. If the size change plate is not properly aligned, the paper tray
may become damaged.
8.
Fix the outer size change plate with the two blue screws using a coin or something similar,
while slightly holding its centre front portion and pressing it towards you.
Chapter 9 - Paper, toner, and staples254
Adjust the media size for the bulk media module (optional)