User Manual

#
NOTE
•
The paper trays hold approximately 3,500 sheets of paper (80 g/m2 / 22 lb Bond).
•
Only load the following sizes:
- 330.2 mm × 482.6 mm, 320 mm × 450 mm (SRA3), 304.8 mm × 457.2 mm,
A3, B4, A4, A4R, and B5 paper into the paper tray. Other than A4 paper cannot
be loaded horizontally.
- 13" x 19", 12.60" x 17.72", 12" x 18", 11" x 17", LGL, LTR, or LTRR paper
into the paper deck. Only LTR paper can be loaded horizontally into the paper
deck.
•
For more information on the size change plate, see ‘Adjust the media size for the
bulk media module (optional)’ on page 252
•
Hot air that is blown by the fan may warm the inner size change plate of the paper
tray.
•
If there are instructions on the package of paper about which side of the paper to
load, follow those instructions.
•
When paper is loaded in the paper tray, the side facing up is the one printed on.
•
If problems occur, such as poor print quality or paper jams, try turning the paper
stack over, and reload it. However, you cannot turn the texture paper and 1-sided
coated paper over. Change the new paper.
5.
Lower the feeding support roller.
6.
Close the paper tray.
The inside lifter automatically rises, and prepares the paper tray for printing.
Chapter 9 - Paper, toner, and staples250
Load the media into the bulk media module (optional)