User Manual

2.
Unlock the lever of the size change plate.
3.
Load the desired paper to approximately 10 mm / 3/8" in height. Slide the outer size
change plate and inner size change plate to align them with the desired paper size.
#
IMPORTANT
Do not subject the paper holder plate to shock when loading paper into the paper
tray, as this may result in a malfunction or damage to the machine.
#
IMPORTANT
Adjust the guides correctly to avoid causing a paper jam, dirty prints, or make the
inside of the machine dirty.
Chapter 9 - Paper, toner, and staples 241
Adjust the paper tray to hold a different media size