User Manual

Clean the glass plate
Introduction
Clean the glass plate/original feeding belt/underside of the platen cover by following the
procedure below.
#
IMPORTANT
If the glass plate/original feeding belt/underside of the platen cover is dirty, the original
may not be scanned clearly, or the size of the original may be detected incorrectly.
#
NOTE
Cleaning the underside of the platen cover is necessary only if the platen cover is at-
tached.
Clean the glass plate
1.
Clean the glass plate/original feeding belt/underside of the platen cover with a cloth
dampened with water or a mild cleaning agent, and wipe them with a soft, dry cloth.
Move the original feeding belt manually, and clean the section that is hidden.
Chapter 7 - Copy jobs200
Clean the glass plate