User Manual

#
IMPORTANT
•
Make sure to place only one original at a time. If more than one original is placed
at a time, a paper jam may occur.
•
If your original is curled, flatten it out as much as possible before placing it into
the SADF tray.
#
NOTE
•
Once scans are made from the originals, the originals are returned to the original
output tray.
•
When you need to make another scan, set the scan mode and place the original
in the SADF tray.
4.
When scanning is complete, close the SADF tray.
#
CAUTION
Close the SADF tray gently to avoid catching your hand, as this may result in
personal injury.
Chapter 7 - Copy jobs 197
Feed originals to the SADF (optional)