User Manual

Feed originals to the SADF (optional)
Introduction
You can use the SADF to feed heavy or lightweight originals one by one, face down.
Feeding originals in a portrait position is referred to as long edge feed (LEF). Feeding
originals in a landscape position is referred to as short edge feed (SEF).
You can place the following originals into the SADF tray:
•
Weight:
- 38 to 216 g/m²
•
Size:
- A3, B4, A4, A4R, B5, B5R, or A5
(A5 originals cannot be placed horizontally. (A5R))
Feed originals to the SADF (optional)
1.
Open the SADF tray.
2.
Adjust the slide guides to fit the size of your original.
3.
Place your original one sheet at a time, face down into the SADF tray, sliding it forward
gently as far as it will go.
Chapter 7 - Copy jobs196
Feed originals to the SADF (optional)