0-00-DR-C125_RG_UK.book Page 1 Thursday, September 8, 2011 6:03 PM Reference Guide • Please read this manual before operating this scanner. • After you finish reading this manual, store it in a safe place for future reference.
0-00-DR-C125_RG_UK.
0-00-DR-C125_RG_UK.book Page 3 Thursday, September 8, 2011 6:03 PM FCC REGULATIONS (For 120 V model) Document Scanner, Model M111081 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
0-00-DR-C125_RG_UK.book Page 4 Thursday, September 8, 2011 6:03 PM Für EMVG Disclaimers Dieses Produkt ist zum Gebrauch im Wohnbereich, Geschäfts-und Gewerbebereich sowie in Kleinbetrieben vorgesehen. The information in this document is subject to change without notice. Model Names The following names may be provided for the safety regulations in each sales region of the Document Scanner. DR-C125: Model M111081 Trademarks • Canon and the Canon logo are registered trademarks, of Canon Inc.
0-00-DR-C125_RG_UK.book Page 5 Thursday, September 8, 2011 6:03 PM STEP 1 Setup Guide Setup Guide Please read first. Checking the Accessories If any of the items listed below are missing or damaged, contact your local authorized Canon dealer or service representative. Scanner USB Cable Type A/Type B (Length: 1.8 m) Reference Guide AC Adapter/Power Cord (Connected length: 2.6 m) Before Use Setup Disc Warranty Card (U.S.A.
0-00-DR-C125_RG_UK.book Page 6 Thursday, September 8, 2011 6:03 PM Setup Disc Contents Install the following software necessary for using the scanner from the supplied Setup Disc. • CaptureOnTouch This is a dedicated scanning utility for this product. • Scanner Driver This is the scanner driver for this product. Third-Party Software The following software applications are also included on the supplied Setup Disc. • Presto! BizCard Business card management software from NewSoft Technology Corp.
0-00-DR-C125_RG_UK.book Page 7 Thursday, September 8, 2011 6:03 PM Installing the Software System requirements The following system requirements are recommended for optimal use of this scanner. Computer CPU: Memory: Hard disk: USB interface: Monitor: Optical drive: Intel Core 2 Duo 1.66 GHz or faster 1 GB or more 3 GB or more available space required for installation of all software Hi-Speed USB 2.0 Resolution of 1024 x 768 (XGA) or better recommended. Drive capable of reading DVDs.
0-00-DR-C125_RG_UK.book Page 8 Thursday, September 8, 2011 6:03 PM Installing in Windows 2 Click [Typical Installation]. IMPORTANT • Install the software before connecting the scanner to the computer. • Log on to Windows as an Administrator. • Close all other applications before installing the software. 1 Insert the Setup Disc into the DVD drive of the computer. The setup menu automatically starts up when you insert the disc into the drive. (If the menu does not start up, execute setup.
0-00-DR-C125_RG_UK.book Page 9 Thursday, September 8, 2011 6:03 PM 5 Click [Next]. Read the license agreement, and click [I accept the terms in the license agreement] and then [Next] if you agree to it. 6 Click [Install]. 7 When the driver installation is complete, click [Finish]. 8 Click [Next].
0-00-DR-C125_RG_UK.book Page 10 Thursday, September 8, 2011 6:03 PM 9 Read the license agreement, and click [Yes] if you agree to it. 10 Click [Next]. 11 Specify whether to install plug-in for Evernote, Microsoft SharePoint and Google docs, and click [Next]. 12 When CaptureOnTouch installation is complete, click [Finish].
0-00-DR-C125_RG_UK.book Page 11 Thursday, September 8, 2011 6:03 PM Setup Guide 13 Select the language you want to use, and click [Next]. 15 Click [Exit] to finish installing the software. Installing in Mac OS X IMPORTANT • Install the software before connecting the scanner to the computer. • Close all other applications before installing the software. 1 Insert the Setup Disc into the DVD drive of the computer. 14 When the User Manual installation is complete, click [Finish].
0-00-DR-C125_RG_UK.book Page 12 Thursday, September 8, 2011 6:03 PM 2 Click [DR-C125 Installer]. About Installation of Third-Party Software If you open the folder containing the software instead of selecting [DR-C125 Installer], you can choose third-party software applications for installation. 4 5 Click [Continue]. Read the license agreement and click [Continue] to accept it.
0-00-DR-C125_RG_UK.book Page 13 Thursday, September 8, 2011 6:03 PM 8 9 Setup Guide 7 Click [Install]. Enter the user name and the password with administrator privileges, and click [OK]. When the installation is complete, click [Close].
0-00-DR-C125_RG_UK.book Page 14 Thursday, September 8, 2011 6:03 PM STEP 3 Connecting to a Computer Connect the scanner to the computer and the power supply. IMPORTANT • Do not connect the scanner to the computer before installing the software. • Before connecting the scanner to the computer, verify that the power of the scanner is OFF. If the power is ON, turn it OFF.
0-00-DR-C125_RG_UK.book Page 15 Thursday, September 8, 2011 6:03 PM Turning the Power ON The power of the scanner can be turned ON and OFF with the power button on the front of the scanner. 1 2 Setup Guide STEP 4 Make sure that the scanner and computer are connected properly. When the scanner is properly connected to the computer, the (CaptureOnTouch) icon appears on the taskbar (or menu bar) as follows. Windows taskbar Press the power button.
0-00-DR-C125_RG_UK.book Page 16 Thursday, September 8, 2011 6:03 PM Introduction Thank you for purchasing the Canon imageFORMULA DR-C125 Document Scanner. Please read the following manuals carefully and familiarize yourself with the functions of the scanner before use to ensure you sufficiently understand the functions and make the most of the scanner’s capabilities. After reading the manuals, store them in a safe place for future reference.
0-00-DR-C125_RG_UK.book Page 17 Thursday, September 8, 2011 6:03 PM Table of Contents Setup Guide ......................................................................... 5 Introduction ....................................................................... 16 Symbols Used in This Manual.................................................... 16 Important Safety Instructions.......................................... 18 Installation Location ...................................................................
0-00-DR-C125_RG_UK.book Page 18 Thursday, September 8, 2011 6:03 PM Important Safety Instructions To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below. Installation Location The performance of this scanner is affected by the environment in which it is installed. Make sure that the location where the scanner is installed meets the following environmental requirements.
0-00-DR-C125_RG_UK.book Page 19 Thursday, September 8, 2011 6:03 PM Moving the Scanner ● When moving the scanner, always hold it with both hands to avoid dropping it. The scanner weighs approximately 2.6 kg (5.73 lb). ● Make sure to disconnect the interface cable and AC adapter before moving the scanner. If the scanner is transported with these items connected, the plugs and connectors may be damaged.
0-00-DR-C125_RG_UK.book Page 20 Thursday, September 8, 2011 6:03 PM ● Do not allow water or flammable substances (alcohol, paint thinner, benzene, etc.) to spill into the scanner, as this may result in a fire or electric shock. ● Push the power button to turn the scanner OFF for safety when not using the scanner for a long period of time, such as overnight.
0-00-DR-C125_RG_UK.book Page 21 Thursday, September 8, 2011 6:03 PM Features of the Scanner The main features of the document scanner DR-C125 are described below. ● Compact Design The scanner has a compact size of 300 (W) x 336 (H) x 235 (D) (11.81" (W) x 13.2" (H) x 9.25" (D)) mm when the document feed is open. A newly designed feed mechanism saves space by eliminating the need for space to eject paper at the front of the scanner.
0-00-DR-C125_RG_UK.book Page 22 Thursday, September 8, 2011 6:03 PM ● Prescan Function The scanner is equipped with a Prescan function that allows you to adjust the contrast and brightness of a prescanned image and then send the adjusted image to the application software, without needing to scan the document again. ● Character/Line Emphasis Function If characters and lines in scanned images are not clearly visible, you can use this function to adjust their thickness during scanning.
0-00-DR-C125_RG_UK.book Page 23 Thursday, September 8, 2011 6:03 PM Names and Functions of Parts E Feed Support Front View Pull out this to support loaded documents. C F Document Feed Tray Open this when loading documents for scanning. D E F A G Power Button This turns the scanner ON and OFF.
0-00-DR-C125_RG_UK.book Page 24 Thursday, September 8, 2011 6:03 PM Connectors Back View A A B A Power Connector B Connect the supplied AC adapter to this connector. B USB Connector Connect the supplied USB cable to this connector. C A OPEN Button Press this button to open the front unit. B Kensington Slot Connect an anti-theft key chain or the like. C Cable Grooves Secure the USB cable and power cord that are connected to the scanner along the rear of the scanner.
0-00-DR-C125_RG_UK.book Page 25 Thursday, September 8, 2011 6:03 PM Documents The scanner can scan documents ranging in size from business cards to Legal/A4. The document sizes that this scanner can scan are shown below. Plain Paper Size Width: 50.8 mm to 216 mm (2" to 8.5") Length: 53.9 mm to 356 mm (2.12" to 14")* Paper thickness: When U-turn path: 52 to 128 g/m2 (14 to 34 lb bond) 0.06 to 0.15 mm (0.0024" to 0.0059") When straight path: 40 to 209 g/m2 (11 to 58 lb bond) 0.05 to 0.25 mm (0.002" to 0.
0-00-DR-C125_RG_UK.book Page 26 Thursday, September 8, 2011 6:03 PM Card (plastic or laminated) Size: 53.9 mm x 85.5 mm (2.12" x 3.37") (ISO standard) Card thickness: 0.76 mm (0.03") or less, 1.4 mm (0.055") or less for the embossment Orientation: Horizontal feeding only Feed path: Straight path only Embossed cards can be scanned. CAUTION • Use the straight path when scanning cards.
0-00-DR-C125_RG_UK.book Page 27 Thursday, September 8, 2011 6:03 PM How to Place Documents Switching the Feed and Eject Methods Placing Documents for Standard Feeding Use the two levers on the scanner to switch the feed and eject methods based on the type of document you are scanning. Ordinarily, standard feeding should be used when scanning multiple documents of a standard size at one time. Standard feeding enables the multiple documents to be fed while separating each page.
0-00-DR-C125_RG_UK.book Page 28 Thursday, September 8, 2011 6:03 PM 3 When scanning long documents, pull out the feed extension plates and eject support. 4 Set the feed selection lever and the eject selection lever. Set the feed selection lever to the standard feeding position (lower position). Set the eject selection lever to the U-turn path position ( ). When scanning documents that contain both standard paper and plastic cards, use the straight path.
0-00-DR-C125_RG_UK.book Page 29 Thursday, September 8, 2011 6:03 PM 6 Place the document. Insert the document in the feed tray so that the front is facing forward and the top is facing upward. After inserting the document in the document feeder, align the document guides with both edges of the document. IMPORTANT • When placing documents into the feed tray, take care not to cut your hands on the edges of the paper.
0-00-DR-C125_RG_UK.book Page 30 Thursday, September 8, 2011 6:03 PM Placing Documents for Non Separation Feeding When scanning a thick document one page at a time or scanning a document that has multiple pages fastened together, set document feeding to non separation mode. This enables the placed document to be scanned without the pages being separated, regardless of the number of pages. 1 Set the feed selection lever and the eject selection lever.
0-00-DR-C125_RG_UK.book Page 31 Thursday, September 8, 2011 6:03 PM 3 Place the document in the document feed tray. IMPORTANT • With the straight path, documents are ejected at the front of the scanner. Do not place anything that will block output near the document eject area. Also, install the scanner on a smooth surface to enable documents to be smoothly ejected. Placing Cards 1 Set the feed selection lever and the eject selection lever.
0-00-DR-C125_RG_UK.book Page 32 Thursday, September 8, 2011 6:03 PM 3 Place the card horizontally with the top edge facing upward. CAUTION • Place the card one at a time. • If you place cards to be fed vertically, they may not be ejected properly, and cards that get jammed may be damaged when you remove them. Take care of the orientation when placing cards. • Ultrasonic double feed detection will not function properly when scanning cards. Clear the [Detect by Ultrasonic] check box in the [Feeding] tab.
0-00-DR-C125_RG_UK.book Page 33 Thursday, September 8, 2011 6:03 PM Scanning with CaptureOnTouch (Windows) What is CaptureOnTouch? CaptureOnTouch is a scanning application that allows you to scan a document with a simple operation by following the instructions on the screen. Cloud Service Save to folder Save the file to a specified folder. Print Print with a specified printer.
0-00-DR-C125_RG_UK.book Page 34 Thursday, September 8, 2011 6:03 PM Exiting CaptureOnTouch To close the CaptureOnTouch window, click at the top of the window. This closes the window, but CaptureOnTouch will continue to reside in the system. To quit the CaptureOnTouch application, click (CaptureOnTouch icon) in the taskbar, and select [Exit] from the menu. Scan First Operation Flow Scan the document ▼ Configure the output settings ▼ Output the scanned images 1 2 Place the document in the scanner.
0-00-DR-C125_RG_UK.book Page 35 Thursday, September 8, 2011 6:03 PM 3 IMPORTANT Set the scan method in the top screen. A B A Specify whether to enable continuous scanning. When previewing the scanned image or splitting up a large document to scan in parts, select [ON] to enable continuous scanning. B Specify whether to scan the document in full auto mode. When you want to specify arbitrary scanning conditions, select [OFF] and configure the scanner settings. (See p.
0-00-DR-C125_RG_UK.book Page 36 Thursday, September 8, 2011 6:03 PM 5 Configure the settings related to output and then output the scanned images. Select Scan Job Operation Flow Register the job ▼ Select the job ▼ A Scan the document ▼ B Output the scanned images Registering and Editing Jobs A Configure the settings related to output. (See p. 42) B Click this button to output the scanned images. The button name differs for each output method.
0-00-DR-C125_RG_UK.book Page 37 Thursday, September 8, 2011 6:03 PM 2 Enter the job name, and press the Enter key. 4 Click [Output setting], and configure the output settings. The output setting items differ depending on the specified output method. For details on the setting items, see the Help of CaptureOnTouch. 3 Specify the output method of the job. (See p. 42) Selecting a Job and Scanning 1 Place the document in the scanner. (See p. 27) The top screen of Select Scan Job appears.
0-00-DR-C125_RG_UK.book Page 38 Thursday, September 8, 2011 6:03 PM Hint • If you set [Check output after scanning] to [ON], you can check the output settings after scanning. • If you set [Enable continuous scanning] to [ON], you can continue scanning after all the pages of the document are scanned. 3 Click the Start button. IMPORTANT If you configure scanning conditions that consume a large amount of the computer’s memory, scanning may stop because of insufficient memory.
0-00-DR-C125_RG_UK.book Page 39 Thursday, September 8, 2011 6:03 PM When [Check output after scanning] is set to [ON] The Output Confirmation screen appears before the scanned images are output. Change the settings for the output method if necessary and then click the output button. The name of the output button differs for each selected output method. Hint You can also assign any job to the Start button.
0-00-DR-C125_RG_UK.book Page 40 Thursday, September 8, 2011 6:03 PM When Select Scan Job: Dots per inch Specify the scanning resolution. When [Detect automatically] is specified, the resolution is detected automatically from the content of the scanned document. Scanning Side Specify whether to scan only one side or both sides of a document. When [Skip blank page] is specified, any blank paged detected within the document is skipped during scanning.
0-00-DR-C125_RG_UK.
0-00-DR-C125_RG_UK.book Page 42 Thursday, September 8, 2011 6:03 PM Setting the Output Method CaptureOnTouch is provided with various output methods for processing scanned images. The output method specification is common to Scan First and Select Scan Job. Prints the scanned images with a specified printer. When you specify this output method, specify the printer for printing.
0-00-DR-C125_RG_UK.book Page 43 Thursday, September 8, 2011 6:03 PM Scanning with CaptureOnTouch (Mac OS X) What is CaptureOnTouch? CaptureOnTouch is a scanning application that allows you to scan a document with a simple operation by following the instructions on the screen. Cloud Service Save to folder Save the file to a specified folder. Print Print with a specified printer. (Network) Send to application Open the scanned image file in a specified application.
0-00-DR-C125_RG_UK.book Page 44 Thursday, September 8, 2011 6:03 PM Quitting CaptureOnTouch To close the CaptureOnTouch window, click at the top of the window. This closes the window, but CaptureOnTouch will continue to reside in the system. To quit the CaptureOnTouch application, click (CaptureOnTouch icon) in the menubar, and select [Exit] from the menu. Scan First Operation Flow Scan the document ▼ Configure the output settings ▼ Output the scanned images 1 2 Place the document in the scanner.
0-00-DR-C125_RG_UK.book Page 45 Thursday, September 8, 2011 6:03 PM 3 IMPORTANT Set the scan method in the top screen. If you configure scanning conditions that consume a large amount of the computer’s memory, scanning may stop because of insufficient memory. If an error message appears due to insufficient memory while scanning is in progress, exit the application, change the scanning conditions, and then try scanning again. A B A Specify whether to enable continuous scanning.
0-00-DR-C125_RG_UK.book Page 46 Thursday, September 8, 2011 6:03 PM 5 Configure the settings related to output and then output the scanned images. Select Scan Job Operation Flow Register the job ▼ Select the job A ▼ Scan the document B ▼ Output the scanned images Registering and Editing Jobs In CaptureOnTouch, up to 10 jobs can be registered for use with Select Scan Job. A Configure the settings related to output. (See p. 42) B Click this button to output the scanned images.
0-00-DR-C125_RG_UK.book Page 47 Thursday, September 8, 2011 6:03 PM 2 Enter the job name, and press the Enter key. 4 Click [Output setting], and configure the output settings. The output setting items differ depending on the specified output method. For details on the setting items, see the Help of CaptureOnTouch. 3 Specify the output method of the job. (See p. 42) Selecting a Job and Scanning 1 Place the document in the scanner. (See p. 27) The top screen of Select Scan Job appears.
0-00-DR-C125_RG_UK.book Page 48 Thursday, September 8, 2011 6:03 PM Hint • If you set [Check output after scanning] to [ON], you can check the output settings after scanning. • If you set [Enable continuous scanning] to [ON], you can continue scanning after all the pages of the document are scanned. 3 Click the Start button. The document is scanned. While scanning is in progress, the number of pages scanned is displayed in addition to the scanner settings.
0-00-DR-C125_RG_UK.book Page 49 Thursday, September 8, 2011 6:03 PM When [Check output after scanning] is set to [ON] The Output Confirmation screen appears before the scanned images are output. Change the settings for the output method if necessary and then click the output button. The name of the output button differs for each selected output method. Hint If a job is assigned to the Start button, the document is scanned and the scanned images are output according to the settings of the job.
0-00-DR-C125_RG_UK.book Page 50 Thursday, September 8, 2011 6:03 PM When Select Scan Job: Dots per inch Specify the scanning resolution. When [Detect automatically] is specified, the resolution is detected automatically from the content of the scanned document. Scanning Side Specify whether to scan only one side or both sides of a document. When [Skip blank page] is specified, any blank paged detected within the document is skipped during scanning.
0-00-DR-C125_RG_UK.
0-00-DR-C125_RG_UK.book Page 52 Thursday, September 8, 2011 6:03 PM Setting the Output Method CaptureOnTouch is provided with various output methods for processing scanned images. The output method specification is common to Scan First and Select Scan Job. When Scan First: For Scan First, select an output method in the output method selection screen that appears after scanning, and then specify each of the output method items. Print Prints the scanned images with a specified printer.
0-00-DR-C125_RG_UK.book Page 53 Thursday, September 8, 2011 6:03 PM Daily Maintenance Replacing Consumable Parts The two rollers (feed roller and retard roller) installed in the scanner are consumable parts. The feed roller and retard roller wear with scanning. If the feed roller and retard roller are worn, documents may not feed correctly and paper jams or double-feed errors may occur.
0-00-DR-C125_RG_UK.book Page 54 Thursday, September 8, 2011 6:03 PM 2 3 When closing the front unit, make sure that it is completely closed by gently pressing the left and right until you hear a click. Replacing the Feed Roller 1 Open the roller cover. 2 Slide the feed roller to the left, and then remove it. Close the document feed tray. 3 54 Install the new feed roller. When installing the feed roller, align the notch on the roller with the shaft of the front unit.
0-00-DR-C125_RG_UK.book Page 55 Thursday, September 8, 2011 6:03 PM 4 Slide the roller to the right to secure it. Replacing the Retard Roller 1 5 Close the roller cover. Make sure that it is completely closed by pressing until you hear a click. 2 3 Open the roller cover. Remove the retard roller and then install the new retard roller. When installing the retard roller, align the notch on the roller with the shaft of the main unit. Close the roller cover.
0-00-DR-C125_RG_UK.book Page 56 Thursday, September 8, 2011 6:03 PM Resetting the Counters Under Windows 1 2 4 Click the [Maintenance] tab, and click [Reset]. Start Windows and log in as a user with administrator privileges. Click the Start button, and then click [All Programs], [Canon DR-C125], and [Canon imageFORMULA Utility]. imageFORMULA Utility starts. 3 The counter for [Current Rollers] resets. Click [CANON DR-C125 USB] and click [Properties]. The scanner’s properties appear.
0-00-DR-C125_RG_UK.book Page 57 Thursday, September 8, 2011 6:03 PM 7 Click to display the [Scanner Information] dialog box. Auto Power Off Setting The scanner automatically turns off if 4 hours elapse without scanning or another operation being performed. To disable this setting, follow the procedure below. IMPORTANT The Auto Power Off setting is only available in Windows. 1 8 9 Click [Maintenance] to display the [Maintenance] dialog box.
0-00-DR-C125_RG_UK.book Page 58 Thursday, September 8, 2011 6:03 PM 4 5 58 Click the [Maintenance] tab and then clear the [Turn off automatically after 4 hours] check box. Click [OK] to close the scanner properties.
0-00-DR-C125_RG_UK.book Page 59 Thursday, September 8, 2011 6:03 PM Common Problems and Solutions This section provides recommended solutions to common problems. If you have a problem that is not solved by the following, contact your local authorized Canon dealer. Problem 1 The scanner will not turn on. Solutions Confirm that the AC adapter is plugged firmly into a power outlet. Problem 2 The scanner is not recognized.
0-00-DR-C125_RG_UK.book Page 60 Thursday, September 8, 2011 6:03 PM Problem 8 Multiple pages of scanned images cannot be saved to a single file. Solutions Depending on the file format, multiple scanned image pages cannot be saved as a single file with CaptureOnTouch Lite and CaptureOnTouch. File type Processing for multiple pages BMP (Windows only), JPEG Scanned images are always saved one page per file. PPTX (Windows only) Multi-page images are always saved to a single file.
0-00-DR-C125_RG_UK.book Page 61 Thursday, September 8, 2011 6:03 PM Clearing a Paper Jam When paper jams occur during scanning, use the following procedure to clear them. 2 WARNING When the jammed document is on the document ejecting side, open the document eject tray. Be careful when removing jammed paper. It is possible to cut your hand on the edge of a sheet of paper. 1 Remove any documents that have been left in the eject tray. 3 Remove the jammed document.
0-00-DR-C125_RG_UK.book Page 62 Thursday, September 8, 2011 6:03 PM 4 Return the document eject tray to its original position. Make sure that it is completely closed by pushing until you hear a click. 6 Remove the jammed document. IMPORTANT 5 62 Press the OPEN button and pull open the front unit toward you. Make sure to pull the document out carefully, without applying too much force.
0-00-DR-C125_RG_UK.book Page 63 Thursday, September 8, 2011 6:03 PM 7 Close the front unit by gently pushing it up on both sides until it clicks into place. Make sure that the front unit is completely closed by pushing until you hear a click. After removing the jammed paper, check to see if the last page was scanned correctly, and then continue scanning.
0-00-DR-C125_RG_UK.book Page 64 Thursday, September 8, 2011 6:03 PM Specifications Main Unit Type Desktop sheetfed scanner Scanning Document Size Plain Paper Size Width: 50.8 mm to 216 mm (2" to 8.5") Length: 53.9 mm to 356 mm (2.12" to 14") (You can scan documents up to 3,000 mm (118.1") long by setting the scanner to the Long Document mode.) Thickness When U-turn path: 52 to 128 g/m2 (14 to 34 lb bond) 0.06 to 0.15 mm (0.0024" to 0.0059") When straight path: 40 to 209 g/m2 (11 to 58 lb bond) 0.05 to 0.
0-00-DR-C125_RG_UK.book Page 65 Thursday, September 8, 2011 6:03 PM Operating Environment Temperature: 10°C to 32.5°C (50°F to 90.5°F) Humidity: 20% to 80% RH AC Adapter (100 to 240 V type) Model Number Input Output Weight MG1-4578 AC 100 to 240 V, 50/60 Hz, 0.3 to 0.53 A DC 16 V, 1.8 A Approximately 0.2 kg (0.44 lb) (excluding power cord) Replacement parts Exchange roller kit (product code: 5484B001) Kit to replace the rollers (feed roller, retard roller) and document holding guide.
0-00-DR-C125_RG_UK.
0-00-DR-C125_RG_UK.
0-00-DR-C125_RG_UK.book Page 68 Thursday, September 8, 2011 6:03 PM CANON ELECTRONICS INC. 1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN CANON U.S.A. INC. ONE CANON PLAZA, LAKE SUCCESS, N.Y. 11042, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180 EG AMSTELVEEN, THE NETHERLANDS CANON LATIN AMERICA, INC. 703 WATERFORD WAY, SUITE 400 MIAMI, FLORIDA 33126, U.S.A. CANON AUSTRALIA PTY. LTD.
