User`s guide

January 2008 5
Scanner components
Front view
1 Elevator tray extender — open the elevator tray extender to accommodate long documents.
2 Feed module — provides smooth document feeding of various sizes, thicknesses and
textures.
3 Elevator tray side guides — slide the guides in or out to accommodate the document size
you want to scan. Side guides can be left-, center- and right-adjusted to accommodate
documents of various widths. Side guides also lock in place to hold the print location.
4 Gap Release lever — allows you to manually adjust the space between the feed module and
separation roller for documents that require special handling.
5 Output tray and End stop — collects the scanned documents. The output tray width and end
stop length can be adjusted.
Short Document tray (not shown in illustration) — for best stacking performance, the short
document tray can be used when scanning documents from 6.4 x 6.4 in. (164 mm x 164 mm)
to 2.5 x 2.5 (64 mm x 64 mm)
6 POD release latch — push up the POD release latch when you need to access the inside of
the scanner.
7 Stop/Pause and Start/Resume buttons:
Stop/Pause button: (white with red triangle) press to temporarily stop scanning.
Start/Resume button: (green) press to start scanning.
1
2
3
4
5
6
7
8
9
10
11
12