Specifications

Install the printhead.
IMPORTANT
•To turn off the machine, be sure to always press [ON/OFF]. This will ensure that the
printhead is capped and prevent it from drying up.
•If you are not using the machine for a long period of time, we recommend that you
print (in black and colour) or clean the printhead approximately once a month to
maintain the printhead in good working condition.
1 Remove the tape q, then open the inner cover w.
• The printhead holder automatically moves to the left of the machine.
IMPORTANT
•Do not try to manually move or
stop the printhead holder.
•Do not touch any metal parts
inside the machine.
•Do not turn off the machine when
opening the inner cover.
2 Remove the printhead from its packaging, then remove the orange protective
cap A.
IMPORTANT
• Do not touch the electrical contacts B.
3 Raise the lock lever C, then gently slide the printhead into the holder.
Lower the lock lever.
IMPORTANT
• Do not touch the lock lever once the printhead has been installed.
C
B
A
q
w
Turn over to
continue
Turn over to
continue