User`s guide

Chapter 9 Receiving faxes 9-1
Chapter
9
Receiving faxes


Setting the receive mode
Follow this procedure to set the receive mode:
1 Press [Fax].
2 Press [Menu].
3 Press [OK].
4 Use [22
22
] or [33
33
] to select the receive mode:
• Select:
–<FAX ONLY MODE> to automatically receive faxes only. Voice calls will be disconnected.
–<NET SWITCH>* if you have subscribed to the Telstra FaxStream™ Duet service (Australia) or the
Telecom FaxAbility service (New Zealand).
–<MANUAL MODE> for the machine to ring for fax and voice calls. Fax calls must be answered
manually.
–<ANS.MACHINE MODE> to receive faxes automatically and route voice calls to an answering
machine connected to your machine.
–<FAX/TEL AUTO SW> to automatically switch between fax and voice calls. Faxes will be received
automatically, and the machine will ring for voice calls. A phone connected to your machine will
not ring.
5 Press [OK].
• The receive mode will be displayed on the bottom left of the LCD.
* This setting is only available in Australia and New Zealand.
RECEIVE MODE
FAX ONLY MODE
27/12 2003 SAT 15:30
FaxOnly STANDARD
9
Receiving faxes