Printer User Manual
Table Of Contents
- Contents
- Manuals for the Machine
- Available Features
- How to Use This Manual
- Important Safety Instructions
- Installation Requirements and Handling
- Legal Notices
- Laser Safety
- 1. Before Using the Machine
- 2. Document and Paper Handling
- 3. Copying
- 4. Printing from a Computer
- 5. Registering Destinations in the Address Book
- 6. Using the Fax Functions
- Basic Method for Sending Faxes
- Fax Settings
- Specifying Destinations
- Redialing (Manual Redialing)
- Useful Fax Sending Methods
- Receiving Faxes
- Forwarding Fax Documents
- Checking/Handling Fax Documents in Memory
- Changing the Default Values for Fax
- Changing the Fax Settings (Items Specified Using the [Menu] Button)
- 7. Using the Scan Functions
- 8. Maintenance
- 9. Troubleshooting
- Clearing Jams
- Document Jams in the Feeder
- Paper Jams in the Paper Cassette (Cassette 1 or 2)
- Paper Jams in the Multi-purpose Tray (MF8350Cdn Only)
- Paper Jams in the Manual Feed Slot (MF8050Cn Only)
- Paper Jams in the Rear Cover or Duplex Unit (MF8350Cdn Only)
- Paper Jams in the Output Area (MF8350Cdn Only)
- Paper Jams in the Output Area and Rear Cover (MF8050Cn Only)
- Display Messages
- Error Code
- If
Appears - Troubleshooting
- If a Power Failure Occurs
- If You Cannot Solve a Problem
- Clearing Jams
- 10. Registering/Setting the Various Functions
- 11. Appendix
6-4
Using the Fax Functions
Specifying Destinations
Specifying Destinations by Entering a Fax Number
Specify the fax number with the numeric keys, [ ] (Tone), and [ ] (Symbols).
Correcting destinations
Canceling destinations
Press and hold [
] (Clear).
Deleting the last character of a destination
Press [
] (Clear).
•
•
Specifying Destinations Using Coded Dial
Press [ ] (Coded Dial), and then enter the three-digit registration number (001 to
181) with the numeric keys.
To use this feature, you need to register destinations in coded dials beforehand.
"Storing/Editing Coded Dial Codes" (
→
P.5-6)
If incorrect keys are pressed
After pressing [
] (Reset), repeat the procedure from specifying the settings for the document scanning.
Specifying Destinations Using the One-Touch Keys
Press the one-touch key (01 to 19) of the destination.
To use this feature, you need to register destinations in one-touch keys beforehand.
"Storing/Editing One-Touch Keys" (
→
P.5-3)
If incorrect keys are pressed
After pressing [
] (Reset), repeat the procedure from specifying the settings for the document scanning.
Specify ing Destinations