Printer User Manual
Table Of Contents
- Contents
- Manuals for the Machine
- Available Features
- How to Use This Manual
- Important Safety Instructions
- Installation Requirements and Handling
- Legal Notices
- Laser Safety
- 1. Before Using the Machine
- 2. Document and Paper Handling
- 3. Copying
- 4. Printing from a Computer
- 5. Registering Destinations in the Address Book
- 6. Using the Fax Functions
- Basic Method for Sending Faxes
- Fax Settings
- Specifying Destinations
- Redialing (Manual Redialing)
- Useful Fax Sending Methods
- Receiving Faxes
- Forwarding Fax Documents
- Checking/Handling Fax Documents in Memory
- Changing the Default Values for Fax
- Changing the Fax Settings (Items Specified Using the [Menu] Button)
- 7. Using the Scan Functions
- 8. Maintenance
- 9. Troubleshooting
- Clearing Jams
- Document Jams in the Feeder
- Paper Jams in the Paper Cassette (Cassette 1 or 2)
- Paper Jams in the Multi-purpose Tray (MF8350Cdn Only)
- Paper Jams in the Manual Feed Slot (MF8050Cn Only)
- Paper Jams in the Rear Cover or Duplex Unit (MF8350Cdn Only)
- Paper Jams in the Output Area (MF8350Cdn Only)
- Paper Jams in the Output Area and Rear Cover (MF8050Cn Only)
- Display Messages
- Error Code
- If
Appears - Troubleshooting
- If a Power Failure Occurs
- If You Cannot Solve a Problem
- Clearing Jams
- 10. Registering/Setting the Various Functions
- 11. Appendix
2-9
Document and Paper Handling
NOTE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
If you use paper of a di erent size or type
The default paper size/type is set to <Letter> and <Plain 2> in the
setting menu. If you use a di erent paper size or paper type, you need
to change the paper settings.
"Setting a Paper Size and Type" (
→
P.2-16)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
In the Paper Cassette
Before loading paper in the paper cassette, see "Precautions
when Loading Paper" (
→
P.2-13) .
NOTE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
How to load paper in the optional paper cassette (Cassette 2)
Load the paper in Cassette 2 in the same manner as you load the
paper in Cassette 1.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1
Pull out the paper cassette.
Hold the paper cassette with both hands.
2
Spread the paper guides a little wider than the
actual paper width.
(1) Slide the side paper guides.
Holding the lock release lever, slide the paper guides.
The side paper guides move together.
The lock release lever is not installed in MF8050Cn.
(2) Slide the paper guide at the front center.
Holding the lock release lever, slide the paper guides.
MF8350Cdn
(1)
(1)
(2)
(2)
•
MF8050Cn
(1)
(1)
(2)
(2)
When loading Legal size paper
Holding the lock release lever at the front right, adjust the length
of the paper cassette.
MF8350Cdn
MF8050Cn
* If you want to change the size of the paper to be loaded, be sure
to register the paper size in "Setting a Paper Size and Type" (
→
P.2-16) .
3
Load the custom size paper so that the edges of
the paper stack are aligned with the rear side of
the paper cassette.
"Paper Loading Capacity" (
→
P.2-13)
"Paper Loading Orientation" (
→
P.2-14)
L oading Paper