Printer User Manual
Table Of Contents
- Contents
- Manuals for the Machine
- Available Features
- How to Use This Manual
- Important Safety Instructions
- Installation Requirements and Handling
- Legal Notices
- Laser Safety
- 1. Before Using the Machine
- 2. Document and Paper Handling
- 3. Copying
- 4. Printing from a Computer
- 5. Registering Destinations in the Address Book
- 6. Using the Fax Functions
- Basic Method for Sending Faxes
- Fax Settings
- Specifying Destinations
- Redialing (Manual Redialing)
- Useful Fax Sending Methods
- Receiving Faxes
- Forwarding Fax Documents
- Checking/Handling Fax Documents in Memory
- Changing the Default Values for Fax
- Changing the Fax Settings (Items Specified Using the [Menu] Button)
- 7. Using the Scan Functions
- 8. Maintenance
- 9. Troubleshooting
- Clearing Jams
- Document Jams in the Feeder
- Paper Jams in the Paper Cassette (Cassette 1 or 2)
- Paper Jams in the Multi-purpose Tray (MF8350Cdn Only)
- Paper Jams in the Manual Feed Slot (MF8050Cn Only)
- Paper Jams in the Rear Cover or Duplex Unit (MF8350Cdn Only)
- Paper Jams in the Output Area (MF8350Cdn Only)
- Paper Jams in the Output Area and Rear Cover (MF8050Cn Only)
- Display Messages
- Error Code
- If
Appears - Troubleshooting
- If a Power Failure Occurs
- If You Cannot Solve a Problem
- Clearing Jams
- 10. Registering/Setting the Various Functions
- 11. Appendix
2-4
Document and Paper Handling
Placing Documents on the Platen Glass
1
Open the feeder.
2
Place a document face down.
3
Align the document with the appropriate paper
size marks.
If your document does not match any of the paper size marks,
align the center of your document with the arrow mark.
4
Close the feeder gently.
The machine is ready to scan the document.
When scanning is complete, remove the document from the
platen glass.
CAUTION
Precautions when closing the feeder
Be careful not to get your fingers caught. This may cause
personal injury.
Do not press down the feeder forcefully. This may damage the
platen glass and cause personal injury.
•
•
Loading Document in the Feeder
1
Spread the document guides a little wider than
the actual document width.
2
Pull out the tray extension before loading the
large size document.
Pull out the tray extension when the document is hanging out of
the document feeder tray.
3
Fan the document stack and even the edges.
Thoroughly fan in
small batches.
Tap the edges on a flat
surface a few times.
Pl acing Documents
This section describes placing the documents on
the platen glass or loading them in the feeder.