Printer User Manual

2-2
Document and Paper Handling
Platen glass Feeder
Document type
Plain paper
Heavy paper
Photograph
Small documents (e.g., index cards)
Special types of paper (e.g., tracing paper, transparencies, etc.)*
1
Booklet (Up to 3/4" (20 mm) thickness)
•
•
•
•
•
•
Plain paper
(Multi-page documents of the same size, thickness and weight/one-
page documents)
Size (W x L) Maximum 8 1/2" x 11 3/4" (215.9 mm x 297 mm)
Maximum 8 1/2" x 14" (215.9 mm x 355.6 mm)
Minimum 5 1/2" x 5" (139.7 mm x 128 mm)
Weight Maximum 4.4 lb (2 kg) 12 to 28 lb Bond (50 to 105 g/m
2
)
Paper Capacity 1 sheet Maximum 50 sheets *
2
*
1
When copying transparent documents such as tracing paper or transparencies, use a piece of plain white paper to cover the document after placing it face-down on
the platen glass.
*
2
21 lb Bond (80 g/m
2
) paper
IMPORTANT
When placing document
Place the document after glue, ink or correction  uid on the document is completely dry.
To prevent paper jams in the feeder
Do not use any of the following.
Wrinkled or creased paper
Carbon paper or carbon-backed paper
Curled or rolled paper
Coated paper
Torn paper
Onion skin or thin paper
Documents with staples or paper clips attached
Paper printed with a thermal transfer printer
Transparency
•
•
•
•
•
•
•
•
•
* Note that the margin widths listed below are rough standards and there may be slight variations in actual use.
* The loading orientation of documents is as follows.
- Platen glass: With the document facing down
- Feeder: With the document loaded in the document feeder tray
Docum ents Requirements
Sc anning R ange
Copy
Platen Glass Feeder
1/8 in.
(3 mm)
1/8 in.
(3 mm)
1/8 in.
(3 mm)
1/8 in.
(3 mm)
1/8 in.
(3 mm)
1/8 in.
(3 mm)
1/8 in.
(3 mm)
1/8 in.
(3 mm)
Make sure your document's text and graphics fall
within the shaded area in the following diagram.