Printer User Manual
Table Of Contents
- Contents
- Manuals for the Machine
- Available Features
- How to Use This Manual
- Important Safety Instructions
- Installation Requirements and Handling
- Legal Notices
- Laser Safety
- 1. Before Using the Machine
- 2. Document and Paper Handling
- 3. Copying
- 4. Printing from a Computer
- 5. Registering Destinations in the Address Book
- 6. Using the Fax Functions
- Basic Method for Sending Faxes
- Fax Settings
- Specifying Destinations
- Redialing (Manual Redialing)
- Useful Fax Sending Methods
- Receiving Faxes
- Forwarding Fax Documents
- Checking/Handling Fax Documents in Memory
- Changing the Default Values for Fax
- Changing the Fax Settings (Items Specified Using the [Menu] Button)
- 7. Using the Scan Functions
- 8. Maintenance
- 9. Troubleshooting
- Clearing Jams
- Document Jams in the Feeder
- Paper Jams in the Paper Cassette (Cassette 1 or 2)
- Paper Jams in the Multi-purpose Tray (MF8350Cdn Only)
- Paper Jams in the Manual Feed Slot (MF8050Cn Only)
- Paper Jams in the Rear Cover or Duplex Unit (MF8350Cdn Only)
- Paper Jams in the Output Area (MF8350Cdn Only)
- Paper Jams in the Output Area and Rear Cover (MF8050Cn Only)
- Display Messages
- Error Code
- If
Appears - Troubleshooting
- If a Power Failure Occurs
- If You Cannot Solve a Problem
- Clearing Jams
- 10. Registering/Setting the Various Functions
- 11. Appendix
9-11
Troubleshooting
If <Incor rect size/setting> Appears
The message appears when the paper size speci ed in <Drawer 1>, <Drawer 2>*, or <Multi-Purpose Tray> in the <Paper Settings>
menu is di erent from the size of the paper loaded in the paper cassette or multi-purpose tray. If the message appears, perform the
following operations.
* Cassette 2 (optional) can be used only for MF8350Cdn.
Change the <Paper Settings> menu according to the size of the loaded paper.
After canceling a job, see "Setting a Paper Size and Type" (
→
P.2-16) , and then change <Paper Settings>.
IMPORTANT
For a print job
Check that the paper size setting on the computer is also correct.
Loading paper of the size speci ed in the <Paper Settings> menu
See "Loading Paper" (
→
P.2-9) and reload the paper speci ed in the <Paper Settings> menu.
Printing from the multi-purpose tray/manual feed slot
When <Register Default Set.> is set to <O > for the multi-purpose tray, load paper in the multi-purpose tray/manual feed slot, and
then specify the size of the loaded paper correctly.