Printer User Manual
Table Of Contents
- Contents
- Manuals for the Machine
- Available Features
- How to Use This Manual
- Important Safety Instructions
- Installation Requirements and Handling
- Legal Notices
- Laser Safety
- 1. Before Using the Machine
- 2. Document and Paper Handling
- 3. Copying
- 4. Printing from a Computer
- 5. Registering Destinations in the Address Book
- 6. Using the Fax Functions
- Basic Method for Sending Faxes
- Fax Settings
- Specifying Destinations
- Redialing (Manual Redialing)
- Useful Fax Sending Methods
- Receiving Faxes
- Forwarding Fax Documents
- Checking/Handling Fax Documents in Memory
- Changing the Default Values for Fax
- Changing the Fax Settings (Items Specified Using the [Menu] Button)
- 7. Using the Scan Functions
- 8. Maintenance
- 9. Troubleshooting
- Clearing Jams
- Document Jams in the Feeder
- Paper Jams in the Paper Cassette (Cassette 1 or 2)
- Paper Jams in the Multi-purpose Tray (MF8350Cdn Only)
- Paper Jams in the Manual Feed Slot (MF8050Cn Only)
- Paper Jams in the Rear Cover or Duplex Unit (MF8350Cdn Only)
- Paper Jams in the Output Area (MF8350Cdn Only)
- Paper Jams in the Output Area and Rear Cover (MF8050Cn Only)
- Display Messages
- Error Code
- If
Appears - Troubleshooting
- If a Power Failure Occurs
- If You Cannot Solve a Problem
- Clearing Jams
- 10. Registering/Setting the Various Functions
- 11. Appendix
6-26
Using the Fax Functions
4
Select <Fax Settings> with [ ] or [ ], and then
press [OK].
Communication Settings
Fax Settings
Memory Lock Settings
Select Country/Region
5
Select <Send Start Speed> with [ ] or [ ], and
then press [OK].
Fax Settings
Send Start Speed
Receive Start Speed
6
Select the send start speed with [ ] or [ ], and
then press [OK].
Send Start Speed
33600 bps
14400 bps
9600 bps
7200 bps
* When <Apply> appears in the screen, you need to select <Apply>
and press [OK] after specifying the setting.
7
Press [ ] (Menu) to close the menu screen.
The setting is complete.
Setting Items for the System Settings
The system settings for sending or receiving faxes include the
following items.
System Settings
Communications
Settings
Fax Settings
"Send Start Speed" (
→
P.6-26)
"Receive Start Speed" (
→
P.6-26)
"Select Country/Region"
(
→
P.6-26)
"Memory Lock Settings"
(
→
P.6-26)
Restrict Sending
"Address Book PIN" (
→
P.6-27)
"Restrict New
Destinations" (
→
P.6-27)
"Allow Driver Faxing" (
→
P.6-27)
"Restrict Sending from
History" (
→
P.6-27)
"Fax No. Con rmation
Re-Entry" (
→
P.6-27)
"Restrict Sequential
Broadcast" (
→
P.6-27)
Send Start Speed
This function changes the send start speed, which is useful
when there is di culty initiating the sending of a document.
How to display the settings
[ ]
→
<System Settings>
→
<Communications Settings>
→
<Fax Settings>
→
<Send Start Speed>
Settings
(Boldface: Default settings)
33600 bps, 14400 bps,
9600 bps, 7200 bps,
4800 bps, 2400 bps
Receive Start Speed
This function changes the receive start speed, which is useful
when there is di culty initiating the receiving of a document.
How to display the settings
[
]
→
<System Settings>
→
<Communications Settings>
→
<Fax Settings>
→
<Receive Start Speed>
Settings
(Boldface: Default settings)
33600 bps, 14400 bps,
9600 bps, 7200 bps,
4800 bps, 2400 bps
Select Country/Region
Specify a country or region where the machine is to be used.
IMPORTANT
After con guration
Restart the machine to activate the settings.
How to display the settings
[ ]
→
<System Settings>
→
<Communications Settings>
→
<Fax Settings>
→
<Select Country/Region>
Settings
(Boldface: Default settings)
UnitedStates (US), Canada (CA),
Brazil (BR), Mexico (MX), Other
Memory Lock Settings
Received documents are normally printed immediately.
However, you can store the documents temporarily in memory
without printing. You can print the stored documents at any
time. If you do not need them, you can delete them, saving
paper to be used.
How to display the settings
[
]
→
<System Settings>
→
<Communications Settings>
→
<Memory Lock Settings>