Printer User Manual

6-20
Using the Fax Functions
Chang ing the Default Values for Fax
The default values for fax are those functions which are applied
automatically when [
] (Reset) is pressed or the power is
turned ON. You can change the default values to suit your
needs.
You can register the following types of settings as the default
values.
Resolution
Density
Sharpness
OK
Men
u
Keys to be used for this operation
1
Press [ ] (Menu).
2
Select <Send/Receive Settings> with [ ] or [ ],
and then press [OK].
Menu
Common Settings
Copy Settings
Memory Media Settin
Send/Receive Setting
...
3
Select <Common Settings> with [ ] or [ ], and
then press [OK].
Send/Receive Settings
Common Settings
Fax Settings
4
Select <Send Settings> with [ ] or [ ], and then
press [OK].
Common Settings
Send Settings
Receive Settings
•
•
•
5
Select <Change Defaults> with [ ] or [ ], and
then press [OK].
Send Settings
Register Username
Change Defaults
Sender ID
6
Select a setting item with [ ] or [ ], and then
press [OK].
Resolution/Density/Sharpness
For details on settings, see "Fax Settings" (
→
P.6-3) .
Change Defaults
<Apply>
Resolution: 200 x 100
Density: 0
Sharpness: 0
+
-
+
-
7
After specifying the setting, select <Apply> with
[ ] or [ ], and then press [OK].
Change Defaults
<Apply>
Resolution: 200 x 100
Density: 0
Sharpness: 0
+
-
+
-
8
Press [ ] (Menu) to close the menu screen.
•