imageCLASS MF7400 Series Reference Guide

1
2
3
4
5
6
7
8
9
10
11
11-37
PreviousBack Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
System Settings
POP Server Enters the POP server IP address or name (max. 48 characters).
POP Address Enters the login name for access to the POP server (max. 32 characters).
POP Password Enters the password for access to the POP server (max. 32 characters).
POP Interval Sets the interval you want the POP server to check for incoming e-mail. If the interval is set to 0,
the POP server is not checked automatically. (1-99)
Startup Time Settings Sets the time period required to delay the startup of network communications for the machine
(0-300sec).
Communications Settings Sets the fax and e-mail/I-fax communication.
E-mail/I-Fax Settings
*
1
Sets the e-mail/I-fax communications.
Maximum TX Data Size Sets the maximum data size for outgoing e-mail messages and I-fax documents. If the e-mail
message send job exceeds this data size limit, it is split up into several e-mail messages before
being sent. However, if an I-fax transmission exceeds the data size limit, it is handled as an error,
and it is not sent.
(0MB-99MB)
Divided TX over Max.Data Size Sets whether to divide a document into separate files when it is sent if its size exceeds the data
size you specify.
Off
On
–
–
Default Subject The subject that you enter here is used as the default subject whenever you do not enter a
subject when sending a job.
Fax Settings Sets the facsimile communication.
Send Start Speed Sets the transmission start speed for faxes. (33600bps, 14400bps, 9600bps, 7200bps, 4800bps,
2400bps)
Receive Start Speed Sets the reception start speed for faxes. (33600bps, 14400bps, 9600bps, 7200bps, 4800bps,
2400bps)
*
1
Indicates the item that appear only for the imageCLASS MF7480.