imageCLASS MF7400 Series Reference Guide

1
2
3
4
5
6
7
8
9
10
11
11-35
PreviousBack Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
System Settings
Off SMB client is not used.
On SMB client is used.
Server Enters the NetBIOS name of the machine.
Workgroup Enters the name of the workgroup the machine belongs to.
Comment Enters a comment about the printer.
LM Announce Sets if the machine notifies the LAN Manager of its existence.
Off
On
–
–
SNMP Settings Sets detailed information about SNMP.
Use SNMP Sets whether to activate SNMP.
On Activates SNMP.
Community Name Sets SNMP community name (default: public).
Writable SNMP Enables computers on the network to access the machine and modify its settings.
On
Off
–
–
Get Printer Management Information
from Host
Sets whether to get printer management information from host.
Off Deactivates SNMP.
Enable Dedicated Port Sets or browses detailed information on the machine with a Canon printer driver or utility.
On
Off
–
–
Ethernet Driver Settings Specifies the type of network connection.
Auto Detect Selects the detection method of Ethernet driver.
On Sets the machine to determine the communication mode (Half duplex/Full duplex) and
Ethernet type (10Base-T/100Base-TX) automatically.