imageCLASS MF7400 Series Reference Guide

1
2
3
4
5
6
7
8
9
10
11
11-30
PreviousBack Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Table of Contents
Index
System Settings
DHCP Sets whether to automatically obtain an IPv4 address for the machine using a DHCP server
RARP Sets whether to automatically obtain an IPv4 address for the machine using a RARP server.
BOOTP Sets whether to automatically obtain an IPv4 address for the machine using a BOOTP server.
PING Command Checks the TCP/IPv4 network connection.
IP Address Range Settings Sets whether to use the IP address filter function.
Off Disables the IP address filter.
On Enables the IP address filter.
Permit/Reject Selects whether to permit or reject access from a specified IPv4 address or IPv4 address range.
Register Specifies the IPv4 address or IPv4 address range to be restricted.
Single Address Specifies a single IPv4 address to be restricted.
Multiple Addresses Specifies a range of IPv4 addresses to be restricted.
Edit Edits the IP address or IPv4 address range to be restricted.
Erase Erases the IP address or IPv4 address range to be restricted.
DNS Server Sets the DNS server settings.
DNS Server Address Settings Registers the DNS server address.
Primary DNS Server Registers the primary server address.
Secondary DNS Server Registers the secondary server address.
DNS Host Name/Domain Name Settings Registers the host name and domain name of the DNS server.
Host Name Registers the host name of the DNS server.
Domain Name Registers the domain name of the DNS server.
DNS Dynamic Update Settings Sets whether to use the DNS server dynamic update function.
Off
On
–
–