imageCLASS MF7400 Series Reference Guide

1
2
3
4
5
6
7
8
9
10
11
8-15
PreviousBack Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Remote UI (imageCLASS MF7480/MF7470 Only)
You can set whether to enable the Remote UI to operate the
machine and change settings.
1. Press (Additional Functions).
2. Press [System Settings]  [Remote UI On/Off].
If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using
– (numeric
keys), then press
(Log In/Out) to enter the System Settings menu.
The Remote UI On/Off screen appears.
3. Select [On] or [Off], then press [OK].
[On]: Settings can be specified and the machine can be operated
through the Remote UI.
[Off]: Settings cannot be specified and the machine cannot be
operated through the Remote UI.
4. Press [Done] repeatedly until the Basic Features
screen appears.
The Remote UI is enabled only after you restart the machine (the
main power switch is turned off, and then back on).