User Guide

Installing the Software
2-3
2
Getting Started
IMPORTANT
• For Windows NT 4.0/2000/XP/Server 2003, log on as the Administrator when you install
the driver.
• If you use the Installer, you can also update existing drivers simultaneously while
installing a new driver, or update existing drivers without installing a new driver. Canon
machines whose fax drivers can be updated are listed under "Supported Canon
Products," on p. 1-2.
Standard Installation
Standard installation is when you select an existing printer port manually.
You can also install a network printer or set up a shared printer by following the
procedure below.
NOTE
If you are using a printer connected to a network using TCP/IP protocol, you can
automatically search for a port to install the fax driver. For instructions, see "Dynamic
Installation," on p. 2-11.
1 Insert the Fax Driver Software CD-ROM into the CD-ROM
drive.
2 Double-click the [My Computer] icon ➞ the CD-ROM drive
icon.
3 Double-click the following folders: [FAX] ➞ [us_eng].
4 Double-click the [Setup.exe] icon to start the installation
process.