PCL Driver Guide

Specifying the Finishing Options

3-25

Basic Print Options

If you are using Windows 98/Me/2000/XP/Server 2003, click

[Booklet].

The [Detailed Settings for Booklet] dialog box opens.

Specify the detailed settings ➞ click [OK].

Click [OK] in the [Finishing] sheet.

NOTE

If you are using Windows 98/Me/2000/XP/Server 2003, you can use different paper

for the cover page of the booklet. Select [Different for Cover and Others] under

[Paper Selection] in the [Paper Source] sheet

➞

specify the paper source for the

cover page and body pages of the document. (See "Printing the Cover and Body

Pages of a Booklet from Different Paper Sources (Windows 98/Me/2000/XP/Server

2003)," on p. 3-35.)

Using Creep Correction for Booklet Printing

You can set Creep Correction when booklet printing. Creep Correction is used to

adjust the margins so that the printing position displacement of the outer and inner

pages due to the thickness of the bound sheets does not occur. This ensures that

the margins on all pages are in alignment after the page edges are cut by the

trimmer.

NOTE

This option is available for the imageRUNNER 7105/7095/7086 and imageRUNNER

7105/7095/7086-S1.