imageCLASS MF7280 Starter Guide

3 Press [Network Settings]. 4 Press [TCP/IP Settings]. 5 Press [IP Address Settings]. 6 Press [IP Address], then enter the IP
address using the numeric keys.
7 Press [Subnet Mask] and [Gateway
Address] and specify the settings in the
same way.
If you specify an IP address using DHCP, BOOTP, or RARP,
press [DHCP], [BOOTP], or [RARP]. One of the DHCP,
BOOTP, or RARP settings can be selected at any one time.
8 Press [OK]. 9 Turn off the main power on the right side of
the machine, then turn on the power to
restart the machine.
2019