imageCLASS MF7280 Sending Guide

Scan Settings
3-14
3
Scanning Features
Scan Density and Original Type Settings
You can set the scan density and select the original type before scanning the
original.
Manual Density Adjustment
You can manually adjust the scan density to the most appropriate level for the
original.
NOTE
If you select the Color mode, you should adjust the scan density manually.
1 Place your originals ➞ specify the destination.
NOTE
• For instructions on placing your originals, see "Placing Originals," on p. 1-31.
• For more information on specifying the destination, see Chapter 2, "Basic Sending
Methods."
2 Press the Scan Settings drop-down list ➞ press [Option].
If necessary, see the screen shot in step 2 of "Color," on p.3-5.