imageCLASS MF7280 Sending Guide

Selecting a Scan Mode
3-2
3
Scanning Features
Selecting a Scan Mode
You can set the scan mode in which a document is scanned. The machine has
three preset scan modes: B&W 200x200dpi, B&W 300x300dpi, and Color
300x300dpi.
Select the desired mode from the preset scan modes according to the type of
original you are sending.
NOTE
• If you want to use less memory and make the sending time shorter, use a lower
resolution mode.
• The default setting is 'B&W 200x200 dpi'. You can change this setting in Edit Standard
Send Settings in TX Settings under <Common Settings> in Communications Settings
(from the Additional Functions screen). (See "Standard Send Settings," on p. 7-9.)
• In addition to the scan mode, you can store addresses and other send settings in the
favorites buttons. (See "Favorites Buttons," on p. 7-25.)
1 Place your originals ➞ specify the destination.
NOTE
• For instructions on placing your originals, see "Placing Originals," on p. 1-31.
• For more information on specifying the destination, see Chapter 2, "Basic Sending
Methods."