imageCLASS MF7280 Sending Guide

Specifying Report Settings
10-5
10
Printing Communication Reports
● If you select [On] or [For Error Only]:
❑
Select [On] or [Off] for <Report With TX Image> ➞ press [OK].
Report With TX Image
The selected mode is set.
● If you select [Off]:
❑
Press [OK].
The TX Report is not printed.
The selected mode is set.
5 Press [Done] repeatedly until the Send Basic Features screen
appears.
[On]: Part of the sent document is printed on the report.
[Off]: The contents of the sent document are not printed on the report.