imageCLASS MF7280 Sending Guide

Forwarding Settings
9-32
9
System Settings
2 Select the desired forwarding setting ➞ press
[Validate/Invalidate].
If the desired forwarding setting is not displayed, press [▼] or [▲] to scroll to the
desired forwarding setting.
When you select the desired forwarding setting and press [Validate/Invalidate],
the "On" or "Off" status displayed on the left side of the Condition Name is
switched. ("On" becomes "Off", and "Off" becomes "On".)
To cancel forwarding, press [Validate/Invalidate] again.
The selected forwarding setting is enabled.
3 Press [Done] repeatedly until the Send Basic Features screen
appears.
<On>: The received document is forwarded to the specified destination if
it matches the forwarding conditions.
<Off>: The received document is not forwarded to the specified
destination even if it matches the forwarding conditions.