imageCLASS MF7280 Sending Guide

Communications Settings
9-11
9
System Settings
If you do not want to set the Memory Lock mode, select [Off] ➞ press [OK] ➞
proceed to step 7.
4 If you want to set a password for the Memory Lock mode,
enter a password using - (numeric keys) ➞ press [Next].
If you set a password, it will be necessary to enter the password whenever you
want to change the Memory Lock mode settings, or cancel the Memory Lock
mode.
If you do not want to set the Memory Lock with a password, press [Next] without
entering any numbers.
You cannot store a password with only zeros as the number, such as <0000000>.
If you enter a number that begins with zeros, the leading zeros are ignored.
Example: If <0321> or <0000321> is entered, <321> is stored.
IMPORTANT
Since there is no way to check a stored password, make sure that you write it
down, and keep it in a safe place.
NOTE
If you make a mistake when entering the password, press (Clear) to clear your
entry
➞ enter the correct password.