imageCLASS MF7280 Sending Guide

Paper Drawer Selection
7-42
7
Customizing Communications Settings
NOTE
• For more information on selecting a paper source for printing received documents, see
Chapter 3, "Customizing Settings," in the Reference Guide.
• The default setting for all switches is 'On'.
1 Press (Additional Functions) ➞ [Communications Settings]
➞ [RX Settings] under <Common Settings>.
If necessary, see the screen shots in steps 1 and 2 of "Two-Sided Printing," on
p. 7-39.
• Switch C: The image is reduced and printed on paper that differs in width from
the received document.
• Switch D: The image is printed on paper that is larger in size than the received
document.
Received Data (Original) Output
11" x 17"
LTRR
Received Data (Original) Output
11" x 17"
LTRR