imageCLASS MF7280 Sending Guide

Number of Retry Attempts
7-7
7
Customizing Communications Settings
Number of Retry Attempts
Retry Times is the mode which automatically resends data when the data cannot
be sent. This occurs because the receiver is busy sending or receiving, or when an
error occurs. This setting determines the number of retry attempts. You can set
from one to five retry attempts, or select '0' to turn the Retry Times mode 'Off'.
NOTE
The default setting is '3' times.
1 Press (Additional Functions) ➞ [Communications Settings]
➞ [TX Settings] under <Common Settings>.
If necessary, see the screen shots in steps 1 and 2 of "Data Compression Ratio
for Color Send Jobs," on p. 7-4.
2 Press [Retry Times].
NOTE
If the desired setting is not displayed, press [ ▼ ] or [ ▲ ] to scroll to the desired
setting.