imageCLASS MF7280 Sending Guide

Job Recall
4-32
4
Sending Documents
2 Select [1 Before], [2 Before], or [3 Before] ➞ confirm the
settings ➞ press [OK].
The display returns to the Send Basic Features screen.
NOTE
• If there are more stored Send settings than are currently displayed, you can scroll
through the list by pressing [ ▼ ] or [ ▲ ].
• You can change the settings for a recalled send job.
• If there are multiple destinations stored in Recall memory, the order of the
destinations shown in the list may not correspond to the order in which they were
specified.
3 Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.