imageCLASS MF7280 Sending Guide

Sending Methods
4-22
4
Sending Documents
File Formats:
NOTE
• To view a JPEG file, a software application that supports the JPEG format is
required.
• To view a TIFF file, a software application that supports the TIFF format (such as
Imaging for Windows) is required.
• To view a PDF file, Adobe Reader/Adobe Acrobat Reader/Adobe Acrobat is
required.
• For more information on the different file formats, see "File formats," in the
Glossary, on p. 12-15.
• If you select [JPEG] as the file format, Divide into Pages is automatically set to 'On.'
6 Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
[TIFF]: Sends the file in the TIFF format. This file format is
available only when you scan the document in the B&W
mode.
[PDF]: Sends the file in the PDF format. This file format is
available only when you scan the document in the B&W
mode.
[JPEG]: Sends the file in the JPEG format. This file format is
available only when you scan the document in the Color
mode.
[PDF(Compact)]: Enables you to send files containing text originals or text/
photo originals using a high compression ratio. This file
format is available only when you scan the document in
the Color mode.
If you select [PDF (Compact)] as the file format, it is
recommended that you set the original type setting to
either 'Text/Photo' or 'Text', depending on the image type.