imageCLASS MF7280 Sending Guide

Scan Settings
3-16
3
Scanning Features
1 Place your originals ➞ specify the destination.
NOTE
• For instructions on placing your originals, see "Placing Originals," on p. 1-31.
• For more information on specifying the destination, see Chapter 2, "Basic Sending
Methods."
2 Press the Scan Settings drop-down list ➞ press [Option].
If necessary, see the screen shot in step 2 of "Color," on p.3-5.
3 Press [A] ➞ [OK].
The machine automatically adjusts the scan density to the level best suited to the
quality of the original.
The selected mode is set, and the display returns to the Send Basic Features
screen.
NOTE
An automatic scan density adjustment may not work with transparencies. In this
case, adjust the scan density manually by pressing [Light] or [Dark].
4 Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.