imageCLASS MF7280 Sending Guide

Scan Settings
3-15
3
Scanning Features
3 Press [Light] or [Dark] to adjust the scan density ➞
press [OK].
Press [Light] to move the indicator to the left to make the density lighter, or press
[Dark] to move it to the right to make the density darker.
The selected mode is set, and the display returns to the Send Basic Features
screen.
4 Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press (Start) once for each original. When scanning
is complete, press [Done].
Scanning starts.
The scanned data is sent to the specified destination when scanning is complete.
NOTE
• To cancel the scan settings, press the Scan Settings drop-down list ➞ press
[Option]
➞ [Cancel].
• To cancel all settings and return the machine to the Standard mode, press
(Reset).
Automatic Density Adjustment
This mode enables you to set the machine to automatically adjust the scan density
to the level best suited to the quality of the original.
NOTE
• If you select the Color mode, automatic density adjustment cannot be used.
• If you set the automatic density adjustment, the original type setting is disabled.