imageCLASS MF7280 Remote UI Guide

Device Status and Information Display
2-3
2
Checking and Managing Functions
Information for the selected item is displayed.
IMPORTANT
If you are changing the network settings, the machine must be restarted to enable
the settings. Turn OFF the main power of the machine, wait 10 seconds, and turn
the power back ON.
[Features]: Displays information about the maximum print speed, total
and available memory, and number of drawers installed.
[Network]: Displays the machine's network settings. When in the
Administrator Mode you can specify these settings by clicking
[Change].
[Counter Check]: Displays the total number of pages that have been output for
printing, copying, and received job printing.
Remote_UI_Guide_en-us.book Page 3 Thursday, December 29, 2005 12:17 AM