imageCLASS MF7280 Remote UI Guide

Before You Start the Remote UI
1-8
1
Using the Remote UI
3 Press [On] or [Off] ➞ [OK].
The selected mode is set.
4 Press [Done] repeatedly until the Basic Features screen
appears.
5 Turn OFF the main power of the machine, wait 10 seconds,
and then turn ON the power.
IMPORTANT
The [Remote UI On/Off] setting is made effective only after turning the machine's
power OFF, and then ON.
Remote_UI_Guide_en-us.book Page 8 Thursday, December 29, 2005 12:17 AM