imageCLASS MF7280 Remote UI Guide

Before You Start the Remote UI
1-7
1
Using the Remote UI
Setting the Remote UI to On
You must use the machine's control panel to set the Remote UI on or off.
1 Press (Additional Functions) ➞ [System Settings].
If the System Manager ID and System Password have already been set, enter the
System Manager ID and System Password using - (numeric keys) ➞ press
(ID).
2 Press [Remote UI On/Off].
NOTE
If the desired setting is not displayed, press [ ▼ ] or [ ▲ ] to scroll to the desired
setting.
Remote_UI_Guide_en-us.book Page 7 Thursday, December 29, 2005 12:17 AM