imageCLASS MF7280 Reference Guide

List of Error Messages
7-29
7
Troubleshooting
# 037
Cause Documents could not be received because there was insufficient memory
available.
Remedy Erase unnecessary documents and documents with errors from memory to
increase the amount of available memory. (See Chapter 3, "Checking/Changing
the Fax Jobs," in the Facsimile Guide.)
# 701
Cause The specified Department ID does not exist, or the password has changed.
Remedy Enter the correct Department ID or password using - (numeric keys) on
the control panel, and try again. (See "Entering the Department ID and
Password," on p. 2-21.)
# 749
Cause You could not execute the job because a service call message is being
displayed.
Remedy Turn the main power OFF, wait for 10 seconds, and turn the main power back
ON. If the machine still does not work normally, turn the main power OFF,
disconnect the machine, and contact Canon Authorized Service Facilities or the
Canon Customer Care Center.
# 816
Cause You cannot print because the set page limit total has been reached.
Remedy Contact your System Manager.
# 852
Cause An error occurred because the main power switch was turned OFF while a job
was being processed.
Remedy Check to see if the main power switch is turned ON. Try processing the job
again, if necessary.